What is the first step in the mold remediation process?

The first step in the mold remediation process is to fix the cause of the mold growth. Mold growth is related to moisture, so whether the moisture results from acute water damage like a pipe rupture or flooding, or an ongoing, chronic condition such as ground seepage, excessively high indoor humidity or other factors, these moisture-related issues must be fully resolved at the outset.

How is the presence of mold confirmed in a home?

The presence of mold is confirmed by taking air samples to capture spores. This allows mold remediation specialists to determine the species of mold involved as well as estimate the extent of contamination inside the house. When active growing mold is discovered, it will be physically sampled to confirm the type of mold.

What happens during the mold removal process?

During the mold removal process, rooms or other zones where mold contamination is discovered are usually closed off to prevent further spread during remediation. Wet and/or porous building materials that are mold-damaged generally must be removed and replaced with new uncontaminated materials. Non-porous materials where mold growth is discovered may be wiped clean then treated with an EPA-approved disinfectant formulated to neutralize the specific type of mold.

What services does Rytech Restoration provide for mold remediation?

Rytech Restoration provides a complete mold inspection to identify any mold growth, eliminates existing contamination, and recommends solutions to prevent further growth.

The Ins And Outs Of The Mold Remediation Process

Q: What is the difference between mold removal and mold remediation?

Mold removal refers to the process of removing visible mold from the home. However, this is often an ineffective long-term strategy as contamination generally recurs in a short period of time. On the other hand, mold remediation is a comprehensive approach that addresses issues that trigger mold growth, tests the environment for the presence of mold, pinpoints and removes active mold growth, cleans the air with specialty equipment, and takes appropriate steps to prevent recurrence.

Mold Remediation Specialist Going In and Out of Mold Containment

A mold remediation process is quite different from mere mold removal. Simply removing visible mold from the home is an ineffective long-term strategy as contamination generally recurs in a short period of time. Professional mold remediation is a comprehensive approach that addresses issues that trigger mold growth, tests the environment for presence of mold, pinpoints and removes active mold growth, cleans the air with specialty equipment and takes appropriate steps to prevent recurrence. Here's the sequence in a typical mold remediation process.

First, fix the cause: Mold growth is related to moisture. Whether the moisture results from acute water damage like a pipe rupture or flooding, or an ongoing, chronic condition such as ground seepage, excessively high indoor humidity or other factors, moisture-related issues must be fully resolved at the outset.
Test and identify: Taking air samples to capture spores allows mold remediation specialists to determine the species of mold involved as well as estimate the extent of contamination inside the house. When active growing mold is discovered, it will be physically sampled to confirm the type of mold.
Isolate the contamination: Rooms or other zones where mold contamination is discovered are usually closed off with plastic sheets taped over doorways to prevent further spread during remediation.
Remove infected materials: Wet and/or porous building materials that are mold-damaged generally must be removed, sealed in plastic bags and discarded, then replaced with new uncontaminated materials.
Wipe hard surfaces: Non-porous materials where mold growth is discovered may be wiped clean then treated with an EPA-approved disinfectant formulated to neutralize the specific type of mold. All cleaned areas and materials must be allowed to fully dry so no residual moisture remains.
Vacuum the area: Utilizing vacuums with HEPA-grade filters designed to remove mold, the indoor environment is thoroughly vacuumed to remove residual spores that have settled out of the air. HVAC filters are replaced.
Post-remediation checks: Follow-up air samples may be taken at some time interval after remediation to assess the effectiveness of the procedure and confirm that contamination has not recurred.

Find out more about the professional mold remediation process by contacting the specialists at Rytech Restoration.

Rytech Restoration's Emergency Service Locations

Find your local Rytech Restoration below by clicking and expanding the state where your property is located. Live specialists are standing by, ready to answer your questions and dispatch a certified technician to your door.